SIMULASI LCD MENGGUKANAN PROTEUS

/*****************************************************
This program was produced by the
CodeWizardAVR V2.05.3 Standard
Automatic Program Generator
© Copyright 1998-2011 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com
Chip type               : ATmega32
Program type            : Application
AVR Core Clock frequency: 16,000000 MHz
Memory model            : Small
External RAM size       : 0
Data Stack size         : 512
*****************************************************/

#include <mega32.h>
#include <delay.h>
int shit=1;
// Alphanumeric LCD functions
#include <alcd.h>

// Declare your global variables here

void main(void)
{
// Declare your local variables here

// Input/Output Ports initialization
// Port A initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTA=0x00;
DDRA=0x00;

// Port B initialization
// Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out
// State7=0 State6=0 State5=0 State4=0 State3=0 State2=0 State1=0 State0=0
PORTB=0x00;
DDRB=0xFF;

// Port C initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=P State2=P State1=P State0=P
PORTC=0x0F;
DDRC=0x00;

// Port D initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTD=0x00;
DDRD=0x00;

// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
// Mode: Normal top=0xFF
// OC0 output: Disconnected
TCCR0=0x00;
TCNT0=0x00;
OCR0=0x00;

// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer1 Stopped
// Mode: Normal top=0xFFFF
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0x00;
OCR1BL=0x00;

// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer2 Stopped
// Mode: Normal top=0xFF
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;

// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
// INT2: Off
MCUCR=0x00;
MCUCSR=0x00;

// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x00;

// USART initialization
// USART disabled
UCSRB=0x00;

// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;

// ADC initialization
// ADC disabled
ADCSRA=0x00;

// SPI initialization
// SPI disabled
SPCR=0x00;

// TWI initialization
// TWI disabled
TWCR=0x00;

// Alphanumeric LCD initialization
// Connections are specified in the
// Project|Configure|C Compiler|Libraries|Alphanumeric LCD menu:
// RS - PORTB Bit 0
// RD - PORTB Bit 1
// EN - PORTB Bit 2
// D4 - PORTB Bit 3
// D5 - PORTB Bit 4
// D6 - PORTB Bit 5
// D7 - PORTB Bit 6
// Characters/line: 16
lcd_init(16);
//
while (1)
      {
      // Place your code here
      switch(shit)
      {
      case 1:
      lcd_gotoxy(5,0);
      lcd_putsf("MAKAN");
      lcd_gotoxy(0,1);
      lcd_putsf("1.bakwan");
      lcd_gotoxy(10,1);
      lcd_putsf("2.soto");                
     
      if (PINC.0==0) {delay_ms(10); lcd_clear(); shit=2;}
      else if (PINC.1==0) {delay_ms(10); lcd_clear(); shit=3;}
      else shit=1;
      break;
     
      case 2:  
      lcd_gotoxy(1,0);
      lcd_putsf("1.Rp1500");
      lcd_gotoxy(1,1);
      lcd_putsf("2.Back");  
     
      if (PINC.0==0) {delay_ms(10); lcd_clear(); shit=4;}
      else if (PINC.1==0) {delay_ms(10); lcd_clear(); shit=1;}
      else shit=2;
      break;
     
      case 3:
      lcd_gotoxy(1,0);
      lcd_putsf("1.Rp9000");
      lcd_gotoxy(1,1);      
      lcd_putsf("2.Back");
     
      if (PINC.0==0) {delay_ms(10); lcd_clear(); shit=4;}
      else if (PINC.1==0) {delay_ms(10); lcd_clear(); shit=1;}
      else shit=3;
      break;      
     
      case 4:
      lcd_gotoxy(1,0);
      lcd_putsf("1.Beli");
      lcd_gotoxy(1,1);
      lcd_putsf("2.Pilihan Utama");
      if (PINC.0==0) {delay_ms(10); lcd_clear(); shit=5;}
      else if (PINC.1==0) {delay_ms(10); lcd_clear(); shit=1;}
      else shit=4;
      break;    
     
      case 5:
      lcd_gotoxy(1,0);
      lcd_putsf("T E R I M A");
      lcd_gotoxy(7,1);
      lcd_putsf("K A S I H");
      if (PINC.0==0) {delay_ms(10); lcd_clear(); shit=5;}
      else if (PINC.1==0) {delay_ms(10); lcd_clear(); shit=1;}
      else shit=5;
      break;
      }     }}